Skip to main content

Advertisement

Figure 1 | Diagnostic Pathology

Figure 1

From: Study of parameters in focus simulation functions of virtual slide

Figure 1

Focus simulation control menu. “3D Step Size” sets layer thickness with value “1” for 0.25μm. “3D Focus Layers” sets the total number of layers with value “40” for 40 layers on both side of autofocus plane. This setting, 3D Step Size: 1 and 3D Focus Layers: 40, results 0.25 X (40+1+40), almost 20μm as total thickness to scan.

Back to article page